.JPG/:/)
Three Wire Circuit Tester/Simulator
Two Wire Sensor Circuit Tester/Simulator
Two Wire Sensor Circuit Tester/Simulator
Quickly tests any three wire sensor. Testes Power, Ground and return signal back to the ECU. Tested the power and ground circuits by load testing them with the 194 bulb by pressing the test button. Built with a voltage regulator to dial in the voltage to be read by the ECU, you can confirm all the circuit are working correctly. Works from 5-30 volt systems and from .1-30 volts regulated voltage.
Two Wire Sensor Circuit Tester/Simulator
Two Wire Sensor Circuit Tester/Simulator
Two Wire Sensor Circuit Tester/Simulator
With this little tester you can make sure that the resistor sensor you are about to replace is truly at fault.
Simply put it in place of the sensor and then check that parameter on your scan tool.
Both testers use any style 4mm test leads from your Fluke Meter to home made ones without the protective shoulder.
Smarty-Kat DIS Start/Finish
Two Wire Sensor Circuit Tester/Simulator
Smarty-Kat DIS Start/Finish
The Smarty-Kat, Driver Information System, is a brilliant white 2048 LED display. The Power Supply is 110V AC unit or a 12 Volt Power supply.
The controller is the brains of the SK. A Liquid Crystal Display screen allows you to choose the car number, Sound=S, Transponder=T, ALL, Checker Flag, S.C. (aka: full course yellow), NET and 1-GO. All of this can be set before you hit the display hardkey.
MiniKat Black Flag & SOC
Two Wire Sensor Circuit Tester/Simulator
Smarty-Kat DIS Start/Finish
SOC displays IMP-All=impound all, SND=Sound & TSP=Transponder and up to 50 car numbers.
Black Flag MK displays All, T, S, & SC corresponding with selected car number.